DN100 4 Wet Alarm Check Valve Technical & Dimensional Data


time:

2026-11-18

Manufactured by Ningjin APC Industries, the DN100 4 wet alarm check valve features a 316 mm face-to-face length, 300 psi rating, and CULUS/FM approvals for commercial sprinklers.

📅 Date: November, 2026  |  ✍️ Author: Fire Protection Valve Technical Department

Disclaimer: The key technical parameters in this document are sourced from the official technical documentation for fire‑protection wet alarm valves of Ningjin APC Industries, a top‑tier Chinese UL/FM‑certified fire‑protection valve manufacturer. This documentation serves as a practical production reference for fire‑protection valves manufactured by Ningjin APC Industries and for customers to understand product usage. Should you have any questions regarding specific details, please consult via https://www.apc-valve.com/contact.html.
Intent Breakdown: Targets hydraulic engineers and purchasing agents searching for exact sizing (DN100 / 4-inch), face-to-face dimensions, trim configuration, and UL/FM approvals for mid-size commercial sprinkler risers.

Product Overview & Sizing

The 4 wet alarm check valve (DN100 / 4-inch nominal size) manufactured by Ningjin APC Industries is a primary component for medium-to-large commercial fire sprinkler systems. Rated for 300 psi (20.7 bar) working pressure, this unit ensures reliable alarm activation and backflow prevention.

Dimensional Specifications (DN100 / 4")

Configuration ModelFace-to-Face Length (L)
Flange*Flange (SSBJ-300FF)316 mm / 12.44 inches
Flange*Groove (SSBJ-300FGA)316 mm / 12.44 inches
Groove*Flange (SSBJ-300FGB)316 mm / 12.44 inches
Groove*Groove (SSBJ-300GG)316 mm / 12.44 inches

Trim dimension reference for 4" size: a = 342 mm, b = 250 mm, c = 160 mm, d = 136 mm (approximate trim layout parameters).

Valve Trim Assembly & Maintenance

The 4-inch valve assembly includes a steel retard chamber, pressure gauges (0-600 PSI), Y-strainer filter, pressure switch (ZSJY1.6BP), water motor alarm gong assembly, and stainless steel / brass trim piping. Regular maintenance requires inspecting the valve disc rubber seals (replacing within 18 months if worn) and cleaning the Y-strainer and delayer throttle holes.

Frequently Asked Questions (FAQ)

1. What is the face-to-face length of the 4 wet alarm check valve (DN100)?

The face-to-face length is 316 mm (12.44 inches) across all connection variants (FF, GG, FGA, FGB).

2. What is the pressure rating for the DN100 valve?

It is rated for a working pressure of 300 psi (20.7 bar).

3. What certifications does the APC 4-inch alarm check valve hold?

It holds CULUS Listed, FM Approved, USMCE Approved, and CE Approved certifications.

4. What is included in the standard pressure gauge assembly?

Three 3-way valve pressure gauges (PFE-00A 600PSI) configured to monitor supply and system pressures.

5. How often should the pressure switch be tested on a 4-inch riser?

It is recommended to test the pressure switch periodically, every three months or more frequently.

6. What material is used for the strainer in the trim?

A Y-strainer constructed of SS304 is utilized to keep the pipeline unblocked.

Ningjin APC Industries Incorporated Company
No. 18 Taishan Road, Ningjin County, Shandong Province, P.R.China
Website: http://www.apc-valve.com/
Email: njcuishusheng@vip.163.com  |  rain.cui@apc-valve.com

 

Customer Service Contact
Contact Person: Ms. Cui
WeChat: cuiyuying01
Tel.: +86 18600252968  |  +86 534 5571078
Fax: +86-534-5216766