NEWS CENTER

Hydrant Flanged Connector fire protection manufacturers take you to understand the requirements of indoor fire hydrant installation specifications

time：

2022-06-30

Hydrant Flanged Connector fire protection manufacturers tell you that fire hydrants are mainly composed of fire water sources, water supply facilities, water inlet pipes, horizontal main pipes, fire stand pipes, fire water supply pipe networks, indoor fire hydrant equipment, and control equipment. Hydrant Flanged Connector fire protection manufacturers tell you that the main task of fire hydrants is to deliver fire extinguishing water to indoor fire hydrant equipment.

Cheap Hydrant Flanged Connector fire protection from China manufacturer
Hydrant Flanged Connector fire protection manufacturers tell you that indoor fire hydrant equipment includes water hoses, water guns, water hoses, etc. which are mainly used by personnel to put out fires. The control equipment is used to start the fire pump, and the organic coordination of the facilities ensures the fire extinguishing effect of the system.
Indoor fire hydrant installation specification requirements:
1. When the fire hydrant box is installed, the water outlet direction of the hydrant should be downward or at a 90° angle to the wall where the hydrant is set, and then the hydrant should not be installed on the side of the door shaft.
2. The installation of the indoor fire hydrant box should be kept flat and firm, and the concealed fire hydrant box cannot damage the fire resistance level of the partition wall.
3. The Hydrant Flanged Connector fire protection manufacturer tells you that the opening of the fire hydrant box door should not be less than 120 degrees.
4. The manufacturer of Hydrant Flanged Connector fire protection tells you that the allowable deviation of the verticality of the fire hydrant box installation is 3mm.