NEWS CENTER

Industry News

Company News

Announcements

The dual plate wafer Non-return check valve manufacturer will show you: precautions for check valve installation

time：

2021-09-06

The manufacturer of Dual plate wafer Non-return check valve tells you that the check valve is a universal one-way fluid valve. It is small in size, light in weight, and easy to install between the flanges. The manufacturer of the Dual plate wafer Non-return check valve tells you that the inside of the check valve is composed of two semicircular springs and a plate surface. The pin is fixed on the valve body to make The spring deforms so that the valve plate is closed, and the pressure of the fluid will cause the spring to deform quickly when it is opened, so that the pipeline can be well protected from water hammer damage.

customized Dual plate wafer Non-return check valve supplier(s) china
The Dual plate wafer Non-return check valve manufacturer will take you to understand the matters that should be paid attention to in the installation of the check valve:
The manufacturer of Dual plate wafer Non-return check valve tells you that you should pay attention to the direction of the wafer check valve and the flow direction of the fluid when placing the pipeline;
To be installed in a vertical pipeline. Relative to horizontal pipelines, check valves should be placed vertically;
Use a telescopic tube between the butterfly valve and the check valve. Never connect it directly to other valves;
Avoid adding pipe joints and obstructions within the operating radius of the valve plate;
The manufacturer of Dual plate wafer Non-return check valve tells you not to install a reducer in front of or behind the check valve;
The manufacturer of Dual plate wafer Non-return check valve tells you to leave enough space when installing the check valve near the elbow;
The manufacturer of Dual plate wafer Non-return check valve tells you that when a check valve is installed at the outlet of the water pump, a space of at least six times the valve diameter should flow out to ensure that the butterfly plate is eventually exposed to fluid.