Fire Signal Butterfly Valve/Supervisory Switch Butterfly Valve Selection Guide
time:
2026-10-23
Fire signal butterfly valves combine quarter-turn flow control with an integrated supervisory switch. Technical specs strictly follow Ningjin APC datasheets.
A Fire Signal Butterfly Valve combines quarter-turn flow control with an integrated supervisory switch that alerts the fire alarm control panel if the valve disc moves away from its fully open position.
1. End Connections & Selection Layouts
Fire protection pipelines require specific connection configurations to match system piping standards, operational pressure ratings, and structural installation demands.
Grooved-End Connection Selection
Grooved-end configurations comply with ANSI/AWWA C606 or Metric Standard clear waterway designs. They couple directly to grooved mechanical pipe systems for rapid installation on commercial sprinkler risers and main control lines.
- Model GD-381X (Signal Gearbox): Available in sizes 2", 2½", 3", 4", 5", 6", 8", 10", and 12". Features top flange standard ISO 5211.
- Model GD-381G (Standard Gearbox): Available in sizes 2", 2½", 3", 4", 5", 6", 8", 10", and 12".
- Model GD-381L (Lever Operated): Available in sizes 2", 2½", 3", 4", 5", 6", and 8".
Wafer-Style Connection Selection
Wafer-style designs feature connection standards matching ANSI 125/150 and DIN2501 PN10/16. They are installed between pipe flanges, offering a space-saving structure for tight piping networks.
- Model WD-371X (Signal Gearbox): Available in sizes 2", 2½", 3", 4", 5", 6", 8", 10", and 12". Includes EPDM end face seal and top flange standard ISO 5211.
- Model WD-371G (Gearbox) / WD-371L (Lever): Available in sizes 2", 2½", 3", 4", 5", 6", 8", 10", and 12".
Grooved-Flanged & Flanged-Grooved Hybrid Ends
Designed for backflow prevention and specialized fire line transitions, hybrid configurations support Grooved End, Grooved * Flanged End, and Flanged * Grooved End connections.
- Models HGD-381X / HFGD-381X & HGD-381X-175 / HFGD-381X-175: Available in sizes 2½", 3", 4", 6", 8", and 10". Features ISO 5211 top flange and ductile iron disc with EPDM encapsulation.
2. Supervisory & Electrical Requirements
A Supervisory Switch Butterfly Valve integrates internal electrical signaling components directly into its gear actuator housing to monitor valve closure activity.
Tamper / Supervisory Switch Operation
Models equipped with signal gearboxes (such as GD-381X, WD-371X, HGD-381X, and HFGD-381X) incorporate an internal switch assembly, clip, sealing ring, and wiring conduit within the gear housing.
- Switch Assembly: Connected to internal terminal wiring to send electrical signals if the handwheel rotates away from the open position.
- Visual Indicator: Ductile iron indicator positioned above the gear cover provides immediate local visual status.
Electrical & Regulatory Code Standards
Signal components and valve pressure boundaries strictly meet regulatory standards for fire service:
- Pressure ratings conform to UL 1091, ULC/ORD-C1091, and FM 1112.
- Certified lead-free models compliant with NSF/ANSI 61 and NSF/ANSI 372 are available for potable water fire lines.
3. Size, Pressure & Design Ratings
Technical parameters across the Ningjin APC product family are systematically defined based on valve construction and drive mechanisms.
Installing a certified Supervisory Switch Butterfly Valve ensures that system operating pressure ratings remain fully verified under regulatory oversight.
| Series / Model | Size Range | Max Working Pressure | Max Testing Pressure | Operating Temp. Range |
|---|---|---|---|---|
| HGD-381X / HFGD-381X Series | 2½", 3", 4", 6", 8", 10" | 300 PSI | 600 PSI | 0~80°C / 32~176°F |
| GD-381X Series | 2", 2½", 3", 4", 5", 6", 8", 10", 12" | 300 PSI | 600 PSI | 0~80°C / 32~176°F |
| WD-371X Series | 2", 2½", 3", 4", 5", 6", 8", 10", 12" | 300 PSI | 600 PSI | 0~80°C / 32~176°F |
| GD-381G Series | 2", 2½", 3", 4", 5", 6", 8", 10", 12" | 300 PSI | 600 PSI | 0~80°C / 32~176°F |
| WD-371G / WD-371L Series | 2", 2½", 3", 4", 5", 6", 8", 10", 12" | 300 PSI | 600 PSI | Max 80°C / 176°F |
| GD-381L Series | 2", 2½", 3", 4", 5", 6", 8" | 300 PSI | 600 PSI | 0~80°C / 32~176°F |
Material Construction Knowledge Graph
- Body Material: Ductile Iron.
- Disc & Seat: Ductile Iron disc with EPDM encapsulation.
- Upper & Lower Shafts: 416 Stainless Steel.
- Sealing & Bushings: Upper/Lower Shaft Sealing Nuts in WCB; Shaft Seal & O-Rings in EPDM; Stem Bushing in PTFE / C95400.
- Coating: Fusion bonded Epoxy coated or custom coating upon request.
- Gearbox Components: Gear Body, Cover, Worm Wheel, and Handwheel in Ductile Iron; Worm and Handwheel Shaft in Steel; Gearbox Ratio: 24:1 (2"-6"), 30:1 (8"-10"), 80:1 (12").
- Lever Actuator: Malleable Iron (GD-381L).
4. Certifications & Compliance Matrix
When selecting a Fire Signal Butterfly Valve for commercial or industrial installations, verified third-party approvals guarantee compliance with municipal and international fire protection codes.
Product Specific Approval Matrix
- HGD-381X / HFGD-381X Series: UL, CUL, FM, NSF/ANSI 61 & NSF/ANSI 372, CE.
- GD-381X Series: UL, CUL, FM, VDS, CCC, CE, NSF/ANSI 61 & NSF/ANSI 372.
- WD-371X Series: UL, CUL, FM, VDS, CCC, CE, NSF/ANSI 61 & NSF/ANSI 372.
- GD-381G Series: NSF, CE, NSF/ANSI 61 & NSF/ANSI 372 certified.
- WD-371G / WD-371L Series: NSF, CE, NSF/ANSI 61 & NSF/ANSI 372 certified.
- GD-381L Series: NSF, CE, NSF/ANSI 61 & NSF/ANSI 372 certified.
5. Operational Applications & Selection Rules
Indoor & Outdoor System Applications: These butterfly valve series are engineered for indoor and outdoor fire protection systems, including fire inflow water lines, drain pipes, high-rise building fire fighting systems, and industrial factory building fire protection networks.
System Considerations: While quarter-turn butterfly valves provide compact isolating control on main lines and risers, system designers must evaluate specific installation points—such as fire pump suctions—where full-bore gate valves (e.g., OS&Y) or Post Indicator Valves (PIVs) may be specified by engineering guidelines to eliminate flow turbulence or accommodate buried underground service.
Contact Manufacturer Technical Support
Ningjin APC Industries Incorporated Company
No. 18 Taishan Road, Ningjin County, Shandong Province, P.R. China
Website: http://www.apc-valve.com/
Email: njcuishusheng@vip.163.com | rain.cui@apc-valve.com
Customer Service Contact: Ms. Cui
WeChat: cuiyuying01
Tel: +86 18600252968 / +86 534 5571078 | Fax: +86 534 5216766
Recommended Reading
Content Feedback & Technical Corrections
We maintain a rigorous technical standard. If you have any questions, notice errors, or wish to submit feedback regarding the technical parameters, standards, or product descriptions compiled in this guide, please reach out to our engineering review team:
Technical Correction Email: weidong@apc-valve.com
Relevant news
APC Industries
Mobile website
Add WeChat chat
CONTACT US
Add:No. 18 Taishan Road, Ningjin County, Shandong Province P.R.China
Mobile:+8618600252968
WeChat:cuiyuying01
E-Mail: