200 PSI OSY FLANGE and GROOVE GATE manufacturers will show you how to connect grooved flanges


time:

2021-09-15

200 PSI OSY FLANGE and GROOVE GATE manufacturers tell you that flanges are a common pipe connection method in our lives. Grooved flanges are a new type of connection method at present.

200 PSI OSY FLANGE and GROOVE GATE manufacturers tell you that flanges are a common pipe connection method in our lives. Grooved flanges are a new type of connection method at present. Some are called clamp connections. There are very wide applications in our lives.

Low price 200 PSI OSY FLANGE and GROOVE GATE supplier(s) china
The 200 PSI OSY FLANGE and GROOVE GATE manufacturer tells you that it is now widely used in our liquid and gas pipeline transportation. Compared with our welding technology, the advantages will be more obvious. So how is the grooved flange connected? 200 PSI OSY FLANGE and GROOVE GATE manufacturers will give you a brief introduction!
Grooved flange connection:
Grooved flanges are generally used when connecting with grooved pipe fittings. The 200 PSI OSY FLANGE and GROOVE GATE manufacturer tells you that grooved connections are generally used for pipe diameters greater than or equal to 80 or more; grooved connecting pipes that play a role of connecting and sealing mainly have three parts. Composition: sealing rubber ring, clamp and locking bolt. 200 PSI OSY FLANGE and GROOVE GATE The manufacturer tells you that the rubber seal ring located in the inner layer is placed on the outside of the connected pipe and fits with the pre-rolled groove, and then buckle the clamp on the outside of the rubber ring, and then use two Just tighten the bolts. The 200 PSI OSY FLANGE and GROOVE GATE manufacturer tells you that because its rubber sealing ring and clamp adopt a unique sealable structure design, the grooved connector has a good sealing performance, and as the fluid pressure in the pipe increases, its sealing performance is corresponding Enhanced.
The above is the relevant content of the 200 PSI OSY FLANGE and GROOVE GATE manufacturer telling you about the grooved flange, I hope it will be helpful to everyone!