Structural classification of Flanged ball valve
time：
2021-09-15
The Flanged ball valve manufacturer tells you that the ball of the ball valve is floating. Under the action of the medium pressure, the ball can produce a certain displacement and be pressed against the sealing surface of the outlet end to ensure the sealing of the outlet end.
The Flanged ball valve manufacturer tells you that the ball of the ball valve is floating. Under the action of the medium pressure, the ball can produce a certain displacement and be pressed against the sealing surface of the outlet end to ensure the sealing of the outlet end. Today, let's talk about the structural classification of the Flanged ball valve.
1. Floating ball valve
The floating ball valve has a simple structure and good sealing performance, but the load of the ball bearing the working medium is all transferred to the outlet sealing ring. The Flanged ball valve manufacturer tells you that it is necessary to consider whether the sealing ring material can withstand the working load of the ball medium. This structure is widely used in medium and low pressure ball valves.
2. Fixed ball valve
The ball of the ball valve is fixed and does not move under pressure. The fixed ball valve has a floating valve seat. After being pressurized by the medium, the valve seat moves, so that the sealing ring is tightly pressed on the ball to ensure the sealing. Bearings are usually installed on the upper and lower shafts with the ball, and the operating torque is small, which is suitable for high-pressure and large-diameter valves. Flanged ball valve manufacturers tell you that in order to reduce the operating torque of the ball valve and increase the reliability of the seal, oil-sealed ball valves have appeared in recent years, which not only inject special lubricating oil between the sealing surfaces to form an oil film, which enhances the sealing performance , and reduces the operating torque, and is more suitable for high-pressure and large-diameter ball valves.
3. Elastic ball valve
The ball of the ball valve is elastic. Both the ball and the valve seat sealing ring are made of metal materials, and the sealing specific pressure is very large. The pressure of the medium itself cannot meet the sealing requirements, and external force must be applied. Flanged ball valve manufacturers tell you that this valve is suitable for high temperature and high pressure media. The elastic sphere is obtained by opening an elastic groove at the lower end of the inner wall of the sphere to obtain elasticity. When closing the channel, use the wedge head of the valve stem to expand the ball and press the valve seat to achieve sealing. Before turning the ball, loosen the wedge head, and the ball will return to its original shape, so that there is a small gap between the ball and the valve seat, which can reduce the friction and operating torque of the sealing surface.
Relevant news
APC Industries
Mobile website
Add WeChat chat
CONTACT US
Add：No. 18 Taishan Road, Ningjin County, Shandong Province P.R.China
Mobile：+8618600252968
WeChat：cuiyuying01
E-Mail：
